Kwang Air Shower

Non-standard Air Shower

Home > Non-standard Air Shower > Electric Heating Air Shower
Electric Heating Air Shower

Electric Heating Air Shower

Discover the benefits of electric heating air showers for keeping your indoor spaces warm during the winter months. Learn about their energy efficiency, safety features, and how they compare to traditional heating systems.

Electric heating air showers are a modern solution for heating indoor spaces during the winter months. These systems work by using an electric heating element to warm the air before blowing it into the room. This type of heating system is becoming increasingly popular due to its energy efficiency, affordability, and ease of installation.


How Does Electric Heating Air Shower Work?

Electric heating air shower systems work by drawing in cold air from the room and passing it over an electric heating element. This element warms the air before it is blown back into the room through a vent. The process is repeated until the desired temperature is reached.


Choosing the Right Electric Heating Air Shower

When choosing an electric heating air shower, there are several factors to consider. These include the cost of the unit, its energy efficiency, noise level, durability, and warranty. It is also important to consider the size of the room where the unit will be installed to ensure that it can provide sufficient heat.


Electric heating air showers are generally more energy-efficient than traditional heating systems because they do not require ductwork, which can lead to heat loss. However, they can be more expensive to operate if electricity rates are high.


Safety Concerns with Electric Heating Air Shower

While electric heating air showers are generally safe to use, there are several safety concerns to be aware of. It is important to choose a unit with safety features, such as overheat protection and a tip-over switch. It is also important to keep flammable materials away from the unit and to never leave it unattended.


If you experience any issues with your electric heating air shower, such as a burning smell or strange noises, it is important to turn it off immediately and seek professional help.


The electric heating air shower room adopts "far-infrared carbon fiber U-shaped spiral heating tube" for electric heating, and the heating time only takes 1 minute. After one minute, the indoor temperature can reach 25-35 degrees Celsius. The internal part adopts high-temperature-resistant and flame-retardant silicone wire, and the heat-resistant temperature can reach 180 degrees Celsius. In terms of temperature control system monitoring, advanced electronic monitoring equipment is used. When the temperature exceeds 60 degrees Celsius, the heating will automatically stop to prevent equipment damage and personnel danger caused by overheating. The internal filter replaces the high-efficiency filter of the conventional air shower room, which can only withstand temperatures of 80-90 degrees Celsius, which has been a bottleneck restricting the development of electric heating air shower rooms. A high-temperature-resistant and high-efficiency filter made of imported glue is used, and the filtering temperature can reach 280-350 degrees Celsius, completely ensuring the absolute safety of the air shower room during use. The fully LCD digital display numerical control instrument, soft touch control button, can adjust and set the temperature arbitrarily, and can be adjusted according to the indoor and outdoor temperature to achieve the most comfortable temperature for personnel working environment.


Introduction to PTC heater

PTC is the abbreviation of Positive Temperature Coefficient, which means a positive temperature coefficient, generally referring to semiconductor materials or components with a large positive temperature coefficient. Usually, when we mention PTC, we refer to the Positive Temperature Coefficient thermistor, which is abbreviated as PTC thermistor.

PTC thermistor is a typical semiconductor resistor with temperature sensitivity. When the temperature exceeds a certain temperature (Curie temperature), its resistance value increases in a stepwise manner with the increase of temperature.


The PTC ceramic heater adopts PTC ceramic heating components and corrugated aluminum strips bonded by high-temperature adhesive. This type of PTC heater has the advantages of small thermal resistance and high heat transfer efficiency, and is an automatic constant temperature and energy-saving electric heater. Its outstanding feature is its safety performance. It will not produce the "redness" phenomenon on the surface like the electric heating tube type heater, which can cause burns, fire and other safety hazards under any application conditions.


PTC ceramic heater saves costs and has a long service life.

It does not need special temperature controllers and temperature feedback sensors such as thermocouples to control the heating of the heater. Its temperature adjustment relies on its own material characteristics, so the product has a longer service life than other heaters.


PTC ceramic heater is safe and environmentally friendly.

The design of the heater body has multiple stages of heating temperature below 200 degrees Celsius, and the body will not turn red and has a protective insulation layer under any circumstances. It does not need asbestos and other heat-insulating materials for cooling treatment in any application scenarios, and can be used with peace of mind without causing burns or fire hazards to the human body.


PTC ceramic heater saves electricity.

Compared with electric heating tube and resistance wire heating products, this product adjusts its own heat output based on the change of environmental temperature, relying on the characteristics of the material itself. Therefore, it can optimize the consumption of electric energy of the heater and control it at the minimum. At the same time, the high heat generation efficiency material also greatly improves the utilization efficiency of electric energy.

The characteristics and quality of PTC elements are the key factors that directly determine the performance of PTC heaters, such as those used in constant temperature heating products such as warm air heaters...


The quality of PTC elements directly affects the performance of PTC heaters. Currently, PTC heaters are widely used in constant temperature heating products such as warm air machines. They have several advantages, including low cost, long service life, safety, and energy-saving. PTC heaters can adjust their heat output based on changes in ambient temperature, which optimizes energy consumption and reduces operating costs.


In conclusion, both the electric heating air shower room and PTC heaters have unique features that make them energy-efficient and safe to use. The use of advanced technology and high-quality materials ensures that these devices meet the necessary safety standards while providing effective heating solutions.

Air Shower.jpg

Air Shower.jpg

Air Shower.jpg

Air Shower.jpg

Air Shower.jpg

Air Shower.jpg

Air Shower.jpg

Air Shower.jpg

Air Shower.jpg

Leave Your Message

cache
Processed in 0.005152 Second.